Installation
Svxreflector 1.0 ist in Debian 12 enthalten. Talkgroups werden erst ab Version 2.0 unterstützt. Diese muss händisch erzeugt werden.
Code aus Github clonen:
cd /opt å
git clone https://github.com/sm0svx/svxlink
cd svxlink/
cat INSTALL.adoc
Fehlende Pakete installieren (hier für Debian 12)
apt -y install build-essential cmake doxygen pkg-config \
libsigc++-2.0-dev libasound2-dev libspeex-dev libopus-dev libogg-dev \
libpopt-dev libgcrypt20-dev libgpiod-dev librtlsdr-dev libjsoncpp-dev \
tcl-dev libgsm1-dev libcurl4-openssl-dev groff
Build entsprechend INSTALL.adoc:
cd src
mkdir build
cd build
# QT4 not in Debian 12 (only QT5), skip QT UI
cmake .. -DUSE_QT=NO
make
make doc
useradd svxlink
# usermod -a -G gpio svxlink
sudo usermod -a -G audio svxlink
sudo make install
sudo ldconfig
Nun sollte nicht nur svxlink, sondern auch svxreflector verfügbar sein.
Nachdem svxreflector.conf angepasst ist können sich Nodes (svxlink-Server) verbinden:
1Sun Oct 8 11:57:06 2023: ReflectorLogic: Authentication OK
2Sun Oct 8 11:57:06 2023: ReflectorLogic: Connected nodes: OE3XNR
3Sun Oct 8 11:57:06 2023: ------ Opus encoder parameters ------
4Sun Oct 8 11:57:06 2023: Frame size = 320
5Sun Oct 8 11:57:06 2023: Complexity = 9
6Sun Oct 8 11:57:06 2023: Bitrate = 20000
7Sun Oct 8 11:57:06 2023: VBR = YES
8Sun Oct 8 11:57:06 2023: Constrained VBR = YES
9Sun Oct 8 11:57:06 2023: Maximum audio bw = MEDIUMBAND
10Sun Oct 8 11:57:06 2023: Audio bw = FULLBAND
11Sun Oct 8 11:57:06 2023: Signal type = VOICE
12Sun Oct 8 11:57:06 2023: Application type = AUDIO
13Sun Oct 8 11:57:06 2023: Inband FEC = NO
14Sun Oct 8 11:57:06 2023: Expected Packet Loss = 0%
15Sun Oct 8 11:57:06 2023: DTX = NO
16Sun Oct 8 11:57:06 2023: LSB depth = 16
17Sun Oct 8 11:57:06 2023: --------------------------------------
18Sun Oct 8 11:57:06 2023: ------ Opus decoder parameters ------
19Sun Oct 8 11:57:06 2023: Gain = 0dB
20Sun Oct 8 11:57:06 2023: --------------------------------------
21Sun Oct 8 11:57:06 2023: ReflectorLogic: Using audio codec "OPUS"